TPS Water Blasting and Low-pressure Chemical Washing
TPS Water Blasting and Low-pressure Chemical Washing
Commercial property wash downs mean a new lease on life for your asset
New Zealand is a harsh environment for buildings. Fortunately Water Blasting is a great way to protect your asset from the extremities. From building warranty wash-downs to low-pressure chemical washes our fully certified team can deliver exactly the right option for your building’s needs.
Plus we can help you implement an exterior cleaning maintenance programme
This will extend the life of your paintwork and protect your building, improving the return on your investment and reducing long-term costs.
Experienced experts in the field providing a range of leading cleaning solutions
We’re familiar with all types of cladding and utilise specialist knowledge, market leading equipment and techniques, plus eco-friendly chemicals, to protect both your asset and the environment. Our hot and cold-water blasting service covers a wide range of industrial and commercial applications (like the cleaning of public areas such as plazas and concourses). And we’re also heritage buildings specialists. Heritage buildings obviously require extra care. And we have years of experience in maintaining the exteriors of many heritage sites.
Call or contact us via our simple form to find out how we can look after your building’s exterior.
Talk to us today for Water Blasting and Low-pressure Chemical Washing
Call us on 0800 868 251
Or get in touch by filling in the form below.
We’ll take care of all your commercial property water blasting and cleaning needs
Building warranty wash-downs
Specialised heritage building care
Hot and Cold Water Blasting services for all industrial and commercial applications
Management of exterior maintenance cleaning programmes
Water Blasting and Exterior Care FAQs
For most New Zealand commercial buildings, exterior wall cladding needs washing at least annually, and considerably more often near the coast. Manufacturers set the requirement by environmental category based on distance from the sea, and typical published schedules run from yearly in mild and moderate zones to every six months in severe zones and every three months in very severe coastal zones. Gutters, downpipes and fascias need it more often than walls, because they stay wet and collect debris. The same published schedules put accessories at six monthly in mild and moderate zones, three monthly in severe zones and monthly in very severe zones. Roofs are often assumed to be self-cleaning because rain washes them, and for the open areas that is largely true. The parts that are not rain-washed are the problem: soffits, under eaves, behind and around gutters, fascias and any sheltered area. Those need manual washing on the same cycle as walls or more often. New Zealand’s combination of salt air, high UV and, in some regions, geothermal activity is harder on building exteriors than most owners expect. Coastal, geothermal and industrial sites all need shorter intervals than the standard tables suggest.
Yes, and this is the point most building owners miss. Washing is not a recommendation from the manufacturer, it is a condition of the warranty. Major New Zealand metal cladding and roofing manufacturers state plainly that maintenance including regular washing must be carried out for the warranty to remain valid, with the required frequency set by the building’s environmental category. Those categories are defined by distance from salt water, and they differ between the east and west coasts. Buildings very close to the sea sometimes require the manufacturer to be contacted directly before a warranty is confirmed at all. There are other conditions worth knowing. Sheltered undersides such as soffits may be excluded from the material warranty while still requiring washing. Overpainting an existing roof can void the original material warranty. And washing method is specified too, with limits on water blasting pressure, so a contractor using too much pressure can create the problem you were trying to avoid. The practical advice is to find your actual warranty documents, identify your environmental category, and build the washing schedule from that rather than from a general rule. Then keep records of each wash, because that is what you will need if you ever make a claim.
Commercial gutters should be cleared and inspected at least twice a year, before winter and after autumn leaf fall, and quarterly on buildings with trees nearby, heavy bird activity or a history of blockages. Roofs should be inspected at the same time, checking flashings, penetrations, seals and any sign of ponding or corrosion. Gutter clearing is the highest-return maintenance task on a commercial building. A blocked gutter does not simply overflow outside. Water backs up under flashings and roofing, gets into the building envelope and causes damage that is discovered months later as a stain on a ceiling. Combine it with the inspection rather than treating them separately. Someone already safely at roof level can check flashings and fixings at marginal extra cost, and that is where problems are caught while they are still cheap. Keep the photographs and the report. Roof condition over several years is the evidence base for when the roof actually needs replacing, and it protects you in an insurance claim or a landlord and tenant dispute about whether damage was sudden or gradual.
The biggest driver is the access method. A building with a permanently installed roof unit is the cheapest to clean. Rope access is next. Where an elevated work platform has to be hired, traffic managed and a footpath closed, cost rises sharply. After access, the drivers are building height and glass area, facade complexity, how often you clean, and site constraints such as pedestrian traffic and neighbouring buildings. Facade geometry matters more than people expect. Flat glass is quick. Recesses, projections, louvres, sun shading and awkward angles slow the work substantially. Frequency affects unit cost in both directions. More frequent cleaning costs more a year but less each time, because the glass never gets badly soiled. Long intervals mean every clean is a restoration job, particularly in coastal and high pollution locations. Height work is a safety-critical discipline, so check the provider’s rope access certification and their documented systems rather than comparing price alone. TPS is a certified member of IRAANZ, the Industrial Rope Access Association of New Zealand.
Soft washing, which means low pressure application of cleaning chemistry followed by a gentle rinse, is the right default for most painted and coated building cladding. High pressure water blasting suits hard, durable surfaces: concrete, masonry, car parks, loading docks, paths and industrial surfaces. Using high pressure on coated cladding risks driving water behind the cladding and damaging the coating. Manufacturers usually specify a maximum pressure for washing their products, and exceeding it can affect your warranty. That alone is reason enough to confirm the surface and the product before anyone starts. Hot and cold water both have a place. Cold water handles general soil and salt deposits. Hot water is used where grease, oil or heavy organic growth is involved, which is why it turns up on loading docks, kitchens, waste areas and industrial sites. Chemistry does most of the work on building exteriors. A low-pressure chemical wash that lifts dirt, salt and organic growth and then rinses off gently cleans better and more safely than brute pressure, and it is what should be proposed for a painted or coated facade.
A building warranty wash-down is exterior washing carried out specifically to satisfy the maintenance conditions of a cladding or roofing manufacturer’s warranty, at the frequency and by the method that warranty requires, with records kept as evidence. It is a compliance task rather than a presentation one, even though the building looks better afterwards. It is required because manufacturer warranties on metal cladding and roofing are conditional on maintenance. Salt, dirt and airborne contaminants sitting on a coated surface accelerate corrosion, and the manufacturer’s position is that if you did not remove them at the stated intervals, the resulting deterioration is not their liability. The frequency comes from your environmental category, which is based on how close the building is to the sea, with geothermal and industrial environments treated separately. A building 50 metres from the water needs washing several times more often than one five kilometres inland. Keep the evidence. Dates, areas washed, method and pressure used, and photographs. A warranty claim without a maintenance record is a difficult conversation, and the washing you did is worth nothing to you if you cannot prove it happened.
Cold water blasting is the standard choice for general exterior cleaning: dirt, dust, salt deposits, loose organic growth, concrete, paths, car parks and building exteriors. Hot water blasting is used where heat is needed to break down what cold water cannot shift, which means grease, oil, fat, chewing gum, heavy mould and ingrained industrial grime. The usual commercial applications for hot water are loading docks and service yards, areas around commercial kitchens and food premises, waste and bin areas, workshop and plant room floors, and industrial sites with oil or product residue. Hot water also sanitises to a degree, which is why it is preferred around food handling and waste areas where the goal is hygiene as well as appearance. Cost and practicality differ. Hot water units need fuel and take time to heat, so hot washing is specified where it is genuinely needed rather than used by default. Most building exteriors do not need it, and a provider proposing hot water for a painted facade should be asked why.
Heritage exteriors need the gentlest effective method and a test patch before any full application. High pressure water blasting and aggressive chemistry can permanently damage historic masonry, render, mortar and original joinery, and that damage is often irreversible. The standard approach is low pressure, specialist chemistry matched to the substrate, and proving the method on an inconspicuous area first. Check the heritage status before anything is scheduled. Buildings listed by Heritage New Zealand or scheduled in a district plan may have rules affecting exterior work, and your council is the first call. Doing the work and asking afterwards is an expensive sequence. Water ingress is the particular risk. Older masonry and lime mortar absorb water readily, and forcing water in under pressure causes damage inside the wall that is not visible until later, including salt migration, spalling and damage to internal finishes. TPS is a heritage building specialist and offers specialised heritage building care as part of our exterior services, using low pressure methods and eco-friendly chemicals.
